espresso.compare

De'Longhi REPLACE FILTER: Message: REPLACE FILTER — Causes and Fixes

Routine maintenanceUpdated August 3, 2026

De'Longhi · Dinamica / Eletta Cappuccino Evo

REPLACE FILTERMessage: REPLACE FILTER

Routine maintenance

What the machine is reporting

The water softener filter is exhausted.

Likely causes, most likely first

  1. The water softener filter is exhausted

What to do

  1. 1. Replace the filter, or remove it as described in the section 'Water softener filter'.
  2. 2. If you want to use the appliance without the filter, you must remove it and notify the appliance of its removal.

Source: De'Longhi Coffee Machines Help Center — Eletta Cappuccino Evo. Transcribed from De'Longhi's own published documentation — we do not repair machines and do not publish fixes we cannot cite.

When to stop and call a technician

Never bypass, disable or remove a safety device — a thermal fuse, pressure relief valve or lid interlock is the part standing between a fault and a fire. Do not open a pressurised boiler or work on mains wiring.

Machines this applies to

What the fix needs

As an Amazon Associate we earn from qualifying purchases. These are category searches, not product endorsements — always use the consumable your machine's own manual specifies.

Other De'Longhi codes

All De'Longhi error codes →

Frequently asked

What does De'Longhi REPLACE FILTER mean?
The water softener filter is exhausted.
Can I fix this myself?
Yes, this is routine maintenance rather than a repair. Follow the steps above using the consumable the manufacturer specifies, and if the message returns immediately after a correctly completed cycle, treat it as a service call.
Where do these steps come from?
They are transcribed from De'Longhi Coffee Machines Help Center — Eletta Cappuccino Evo. We do not repair machines and we do not publish a fix we cannot cite to the manufacturer.
Will this code clear on its own?
Maintenance prompts clear when the cycle they are asking for is completed in full — stopping partway usually leaves the counter running. Fault codes clear when the underlying condition is corrected, not by power-cycling past them.