Can I fix this myself?

Yes, this is routine maintenance rather than a repair. Follow the steps above using the consumable the manufacturer specifies, and if the message returns immediately after a correctly completed cycle, treat it as a service call.

Where do these steps come from?

They are transcribed from S8 (NAB) Instructions for Use, ch. 8 'Display messages', p.29. We do not repair machines and we do not publish a fix we cannot cite to the manufacturer.

Will this code clear on its own?

Maintenance prompts clear when the cycle they are asking for is completed in full — stopping partway usually leaves the counter running. Fault codes clear when the underlying condition is corrected, not by power-cycling past them.

JURA Clean: Cleaning programme due — Causes and Fixes

Routine maintenanceUpdated August 3, 2026

JURA · S8, J8, Z10, GIGA 6

Clean — Cleaning programme due

Routine maintenance

What the machine is reporting

The machine is prompting you to clean it.

Likely causes, most likely first

The machine's cleaning interval has been reached

What to do

1. Perform cleaning (see Chapter 'Maintenance – Cleaning the machine').
2. Add the JURA cleaning tablet when the machine displays 'Add cleaning tablet'.

Source: S8 (NAB) Instructions for Use, ch. 8 'Display messages', p.29. Transcribed from JURA's own published documentation — we do not repair machines and do not publish fixes we cannot cite.

When to stop and call a technician

The machine trips a breaker, smells of burning, or shows scorched wiring.
Water is leaking from inside the chassis rather than from the tank, tray or portafilter.
The fault involves the boiler, a pressure valve, the heating element or the pump itself.
The code returns immediately after a correctly completed reset or maintenance cycle.
The machine is under warranty — opening it yourself usually ends that cover.

Never bypass, disable or remove a safety device — a thermal fuse, pressure relief valve or lid interlock is the part standing between a fault and a fire. Do not open a pressurised boiler or work on mains wiring.

Machines this applies to

What the fix needs

Cleaning tablets
Detergent clears the coffee oils in the brew path — a different job from descaling.
Find on Amazon

As an Amazon Associate we earn from qualifying purchases. These are category searches, not product endorsements — always use the consumable your machine's own manual specifies.

Other JURA codes

Descale — Descaling programme due
Change the filter — Water filter exhausted
Clean the milk system — Milk system cleaning due
Rinse the milk system — Milk system rinse requested
Fill water tank (displayed although the water tank is full) — False water-empty message
Fill water tank (not displayed although the water tank is empty) — Water-empty message never appears

All JURA error codes →

Frequently asked

What does JURA Clean mean?: The machine is prompting you to clean it.
Can I fix this myself?: Yes, this is routine maintenance rather than a repair. Follow the steps above using the consumable the manufacturer specifies, and if the message returns immediately after a correctly completed cycle, treat it as a service call.
Where do these steps come from?: They are transcribed from S8 (NAB) Instructions for Use, ch. 8 'Display messages', p.29. We do not repair machines and we do not publish a fix we cannot cite to the manufacturer.
Will this code clear on its own?: Maintenance prompts clear when the cycle they are asking for is completed in full — stopping partway usually leaves the counter running. Fault codes clear when the underlying condition is corrected, not by power-cycling past them.