Can I fix this myself?

Yes, this is routine maintenance rather than a repair. Follow the steps above using the consumable the manufacturer specifies, and if the message returns immediately after a correctly completed cycle, treat it as a service call.

Where do these steps come from?

They are transcribed from the Oracle Instruction Book BES980, ALERTS p.24. We do not repair machines and we do not publish a fix we cannot cite to the manufacturer.

Will this code clear on its own?

Maintenance prompts clear when the cycle they are asking for is completed in full — stopping partway usually leaves the counter running. Fault codes clear when the underlying condition is corrected, not by power-cycling past them.

Breville CLEAN ME!: Clean Me! — Causes and Fixes

Routine maintenanceUpdated August 3, 2026

Breville · Oracle BES980

CLEAN ME! — Clean Me!

Routine maintenance

What the machine is reporting

Indicates when 200 extractions have been carried out since the last cleaning cycle. The cleaning cycle cleans the shower screen and back-flushes the group head.

Likely causes, most likely first

200 extractions completed since the last cleaning cycle

What to do

1. Run the Cleaning Cycle described under Care & Cleaning in the manual, using the supplied cleaning disc and a Breville cleaning tablet in the 1 CUP filter basket.
2. This is a back-flushing cycle and is separate from descaling.

Source: the Oracle Instruction Book BES980, ALERTS p.24. Transcribed from Breville's own published documentation — we do not repair machines and do not publish fixes we cannot cite.

When to stop and call a technician

The machine trips a breaker, smells of burning, or shows scorched wiring.
Water is leaking from inside the chassis rather than from the tank, tray or portafilter.
The fault involves the boiler, a pressure valve, the heating element or the pump itself.
The code returns immediately after a correctly completed reset or maintenance cycle.
The machine is under warranty — opening it yourself usually ends that cover.

Never bypass, disable or remove a safety device — a thermal fuse, pressure relief valve or lid interlock is the part standing between a fault and a fire. Do not open a pressurised boiler or work on mains wiring.

Machines this applies to

What the fix needs

Cleaning tablets
Detergent clears the coffee oils in the brew path — a different job from descaling.
Find on Amazon

As an Amazon Associate we earn from qualifying purchases. These are category searches, not product endorsements — always use the consumable your machine's own manual specifies.

Other Breville codes

FLUSH — FLUSH alert
DESCALE — DESCALE alert
CHANGE FILTER — Change Filter
CLEAN / DESCALE light — CLEAN / DESCALE light — flashing vs solid
ERR — ERR error message on LCD
Operation Error — Operation Error on the touch screen

All Breville error codes →

Frequently asked

What does Breville CLEAN ME! mean?: Indicates when 200 extractions have been carried out since the last cleaning cycle. The cleaning cycle cleans the shower screen and back-flushes the group head.
Can I fix this myself?: Yes, this is routine maintenance rather than a repair. Follow the steps above using the consumable the manufacturer specifies, and if the message returns immediately after a correctly completed cycle, treat it as a service call.
Where do these steps come from?: They are transcribed from the Oracle Instruction Book BES980, ALERTS p.24. We do not repair machines and we do not publish a fix we cannot cite to the manufacturer.
Will this code clear on its own?: Maintenance prompts clear when the cycle they are asking for is completed in full — stopping partway usually leaves the counter running. Fault codes clear when the underlying condition is corrected, not by power-cycling past them.