espresso.compare

JURA Empty coffee grounds container: Grounds container or drip tray full — Causes and Fixes

You can fix thisUpdated August 3, 2026

JURA · ENA 8, E6, E8, S8, J8, Z10, GIGA 6

Empty coffee grounds containerGrounds container or drip tray full

You can fix this

What the machine is reporting

The coffee grounds container is full. / The drip tray is full. You cannot prepare any products.

Likely causes, most likely first

  1. The coffee grounds container is full
  2. The drip tray is full

What to do

  1. 1. Empty the coffee grounds container and the drip tray (see Chapter 'Daily operation – Maintenance actions').

Source: Z10 (NAA) Instructions for Use, ch. 8 'Display messages', p.33. Transcribed from JURA's own published documentation — we do not repair machines and do not publish fixes we cannot cite.

When to stop and call a technician

Never bypass, disable or remove a safety device — a thermal fuse, pressure relief valve or lid interlock is the part standing between a fault and a fire. Do not open a pressurised boiler or work on mains wiring.

Machines this applies to

Other JURA codes

All JURA error codes →

Frequently asked

What does JURA Empty coffee grounds container mean?
The coffee grounds container is full. / The drip tray is full. You cannot prepare any products.
Can I fix this myself?
Yes. This is a user-serviceable condition and the steps above are the ones the manufacturer publishes. If it returns straight after you complete them, stop and book service.
Where do these steps come from?
They are transcribed from Z10 (NAA) Instructions for Use, ch. 8 'Display messages', p.33. We do not repair machines and we do not publish a fix we cannot cite to the manufacturer.
Will this code clear on its own?
Maintenance prompts clear when the cycle they are asking for is completed in full — stopping partway usually leaves the counter running. Fault codes clear when the underlying condition is corrected, not by power-cycling past them.