espresso.compare

JURA Not enough ground coffee: Insufficient pre-ground coffee — Causes and Fixes

You can fix thisUpdated August 3, 2026

JURA · S8, J8, Z10, GIGA 6

Not enough ground coffeeInsufficient pre-ground coffee

You can fix this

What the machine is reporting

There is insufficient ground coffee in the machine; the machine stops the operation.

Likely causes, most likely first

  1. Too little pre-ground coffee was added to the ground coffee funnel

What to do

  1. 1. The next time you prepare a beverage, add more ground coffee (see Chapter 'Preparation – Ground coffee').

Source: S8 (NAB) Instructions for Use, ch. 8 'Display messages', p.28. Transcribed from JURA's own published documentation — we do not repair machines and do not publish fixes we cannot cite.

When to stop and call a technician

Never bypass, disable or remove a safety device — a thermal fuse, pressure relief valve or lid interlock is the part standing between a fault and a fire. Do not open a pressurised boiler or work on mains wiring.

Machines this applies to

Other JURA codes

All JURA error codes →

Frequently asked

What does JURA Not enough ground coffee mean?
There is insufficient ground coffee in the machine; the machine stops the operation.
Can I fix this myself?
Yes. This is a user-serviceable condition and the steps above are the ones the manufacturer publishes. If it returns straight after you complete them, stop and book service.
Where do these steps come from?
They are transcribed from S8 (NAB) Instructions for Use, ch. 8 'Display messages', p.28. We do not repair machines and we do not publish a fix we cannot cite to the manufacturer.
Will this code clear on its own?
Maintenance prompts clear when the cycle they are asking for is completed in full — stopping partway usually leaves the counter running. Fault codes clear when the underlying condition is corrected, not by power-cycling past them.