Can I fix this myself?

No. This fault sits on the technician side of the line — do the user-serviceable checks on this page and no more. Anything involving the boiler, a pressure valve, the heating element or internal wiring needs a qualified technician.

Where do these steps come from?

They are transcribed from Philips support article XC000004106. We do not repair machines and we do not publish a fix we cannot cite to the manufacturer.

Will this code clear on its own?

Maintenance prompts clear when the cycle they are asking for is completed in full — stopping partway usually leaves the counter running. Fault codes clear when the underlying condition is corrected, not by power-cycling past them.

Philips Error 10: Machine requires repair — Causes and Fixes

Call a technicianUpdated August 3, 2026

Philips

10 — Machine requires repair

Call a technician

What the machine is reporting

your machine will need to be repaired. Please contact us

What to do

1. Philips publishes no user-serviceable remedy for this code. Contact the Philips Consumer Care Centre for repair.

Source: Philips support article XC000004106. Transcribed from Philips's own published documentation — we do not repair machines and do not publish fixes we cannot cite.

When to stop and call a technician

This fault is on the technician side of that line. Do the user-serviceable checks above and no more.

The machine trips a breaker, smells of burning, or shows scorched wiring.
Water is leaking from inside the chassis rather than from the tank, tray or portafilter.
The fault involves the boiler, a pressure valve, the heating element or the pump itself.
The code returns immediately after a correctly completed reset or maintenance cycle.
The machine is under warranty — opening it yourself usually ends that cover.

Never bypass, disable or remove a safety device — a thermal fuse, pressure relief valve or lid interlock is the part standing between a fault and a fire. Do not open a pressurised boiler or work on mains wiring.

Machines this applies to

Other Philips codes

03 — Brew group too dirty
CALC / CLEAN — Descale prompt
AquaClean light flashing orange — AquaClean filter needs replacing
02 — Machine requires repair
15 — Machine requires repair
22 — Machine requires repair

All Philips error codes →

Frequently asked

What does Philips 10 mean?: your machine will need to be repaired. Please contact us
Can I fix this myself?: No. This fault sits on the technician side of the line — do the user-serviceable checks on this page and no more. Anything involving the boiler, a pressure valve, the heating element or internal wiring needs a qualified technician.
Where do these steps come from?: They are transcribed from Philips support article XC000004106. We do not repair machines and we do not publish a fix we cannot cite to the manufacturer.
Will this code clear on its own?: Maintenance prompts clear when the cycle they are asking for is completed in full — stopping partway usually leaves the counter running. Fault codes clear when the underlying condition is corrected, not by power-cycling past them.