Can I fix this myself?

No. This fault sits on the technician side of the line — do the user-serviceable checks on this page and no more. Anything involving the boiler, a pressure valve, the heating element or internal wiring needs a qualified technician.

Where do these steps come from?

They are transcribed from Gaggia North America, 'Cadorna Series Error Codes' and 'Velasca Series Error Codes'. We do not repair machines and we do not publish a fix we cannot cite to the manufacturer.

Will this code clear on its own?

Maintenance prompts clear when the cycle they are asking for is completed in full — stopping partway usually leaves the counter running. Fault codes clear when the underlying condition is corrected, not by power-cycling past them.

Gaggia Error 10: Temperature sensor short circuit — Causes and Fixes

Call a technicianUpdated August 3, 2026

Gaggia · Cadorna / Velasca

10 — Temperature sensor short circuit

Call a technician

What the machine is reporting

The temperature sensor is in short circuit.

What to do

1. The unit will need professional repairs. Contact an authorised Gaggia service centre.

Source: Gaggia North America, 'Cadorna Series Error Codes' and 'Velasca Series Error Codes'. Transcribed from Gaggia's own published documentation — we do not repair machines and do not publish fixes we cannot cite.

When to stop and call a technician

This fault is on the technician side of that line. Do the user-serviceable checks above and no more.

The machine trips a breaker, smells of burning, or shows scorched wiring.
Water is leaking from inside the chassis rather than from the tank, tray or portafilter.
The fault involves the boiler, a pressure valve, the heating element or the pump itself.
The code returns immediately after a correctly completed reset or maintenance cycle.
The machine is under warranty — opening it yourself usually ends that cover.

Never bypass, disable or remove a safety device — a thermal fuse, pressure relief valve or lid interlock is the part standing between a fault and a fire. Do not open a pressurised boiler or work on mains wiring.

Machines this applies to

Other Gaggia codes

03 — Brew group blocked in work position
04 — Brew group blocked in home position
The machine must be descaled — Descaling required
Replace the INTENZA+ water filter — Replace the INTENZA+ water filter
Milk carafe ducts should be cleaned — Milk carafe ducts need cleaning
02 — Grinder disconnected

All Gaggia error codes →

Frequently asked

What does Gaggia 10 mean?: The temperature sensor is in short circuit.
Can I fix this myself?: No. This fault sits on the technician side of the line — do the user-serviceable checks on this page and no more. Anything involving the boiler, a pressure valve, the heating element or internal wiring needs a qualified technician.
Where do these steps come from?: They are transcribed from Gaggia North America, 'Cadorna Series Error Codes' and 'Velasca Series Error Codes'. We do not repair machines and we do not publish a fix we cannot cite to the manufacturer.
Will this code clear on its own?: Maintenance prompts clear when the cycle they are asking for is completed in full — stopping partway usually leaves the counter running. Fault codes clear when the underlying condition is corrected, not by power-cycling past them.