Can I fix this myself?

Yes, this is routine maintenance rather than a repair. Follow the steps above using the consumable the manufacturer specifies, and if the message returns immediately after a correctly completed cycle, treat it as a service call.

Where do these steps come from?

They are transcribed from Gaggia North America, 'Anima Series Error Codes'. We do not repair machines and we do not publish a fix we cannot cite to the manufacturer.

Will this code clear on its own?

Maintenance prompts clear when the cycle they are asking for is completed in full — stopping partway usually leaves the counter running. Fault codes clear when the underlying condition is corrected, not by power-cycling past them.

Gaggia Replace the INTENZA+ water filter: Replace the INTENZA+ water filter — Causes and Fixes

Routine maintenanceUpdated August 3, 2026

Gaggia · Anima

Replace the INTENZA+ water filter — Replace the INTENZA+ water filter

Routine maintenance

What the machine is reporting

The machine is ready to brew products: replace the INTENZA+ water filter

Likely causes, most likely first

INTENZA+ filter has reached the end of its service life

What to do

1. Replace the INTENZA+ water filter and activate it via the machine menu.

Source: Gaggia North America, 'Anima Series Error Codes'. Transcribed from Gaggia's own published documentation — we do not repair machines and do not publish fixes we cannot cite.

When to stop and call a technician

The machine trips a breaker, smells of burning, or shows scorched wiring.
Water is leaking from inside the chassis rather than from the tank, tray or portafilter.
The fault involves the boiler, a pressure valve, the heating element or the pump itself.
The code returns immediately after a correctly completed reset or maintenance cycle.
The machine is under warranty — opening it yourself usually ends that cover.

Never bypass, disable or remove a safety device — a thermal fuse, pressure relief valve or lid interlock is the part standing between a fault and a fire. Do not open a pressurised boiler or work on mains wiring.

Machines this applies to

What the fix needs

Water filter
A filter slows how fast scale returns after the fix. It does not replace descaling.
Find on Amazon

As an Amazon Associate we earn from qualifying purchases. These are category searches, not product endorsements — always use the consumable your machine's own manual specifies.

Other Gaggia codes

03 — Brew group blocked in work position
04 — Brew group blocked in home position
The machine must be descaled — Descaling required
Milk carafe ducts should be cleaned — Milk carafe ducts need cleaning
02 — Grinder disconnected
10 — Temperature sensor short circuit

All Gaggia error codes →

Frequently asked

What does Gaggia Replace the INTENZA+ water filter mean?: The machine is ready to brew products: replace the INTENZA+ water filter
Can I fix this myself?: Yes, this is routine maintenance rather than a repair. Follow the steps above using the consumable the manufacturer specifies, and if the message returns immediately after a correctly completed cycle, treat it as a service call.
Where do these steps come from?: They are transcribed from Gaggia North America, 'Anima Series Error Codes'. We do not repair machines and we do not publish a fix we cannot cite to the manufacturer.
Will this code clear on its own?: Maintenance prompts clear when the cycle they are asking for is completed in full — stopping partway usually leaves the counter running. Fault codes clear when the underlying condition is corrected, not by power-cycling past them.